Product Category

Automatic Soda Water Filling Machine Pet Bottle Line

Share This Product

Automatic Soda Water Filling Machine Pet Bottle Line

Inquery

Product Description

Automatic Soda Water Filling Machine Pet Bottle Production Line

Washing Part :

<1>360 degree cleaning inside and outside of the bottle,no dead Angle.

<2>All 304/316 stainless steel rinse heads, water spray style inject design, more save water consumption and more clean .
<3>The flushing pressure can be adjusted.
<4> 304/316 stainless steel washing pump make the machine more durable .

Filling heads :

<1> 304/316 Stainless steel high precision filling nozzle.
<2> Filling volume adjustable in fine rank, same liquid level after filling.
<3> All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean.
<4> 304/316 stainless steel filling pump.

Capping heads :

<1> Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping

<2> All 304/316 stainless steel construction
<3> No bottle no capping
<4> Automatic stop when lack of bottle
<5> Italy ROAL capping hard,capping effect is stable and reliable,Defective rate ≤0.1%

Flat conveyor :

<1> Adapt to customer factory layout.
<2> Special lubrication system, keep products clean, health, safety,extended service life
<3> Electric eyes design keep whole line running safety and quickly,Energy saving. High efficient.
<4> Overload protection mechanism to effectively ensure the safe of the machine
<5>All Stainless steel 304 support, hygienic/firm

Air conveyor :

<1> Air conveyor is fixed on the floor, with fan installed on the top.
<2> Air filter is positioned at every entrance of air fan, to prevent dust blown into bottles. Bottles are held on the neck in the conveyor and transported into filling machine by blowing power.
<3> All are made of stainless steel SUS 304 /316.

Automatic carbonated drink filling machine line packaging specifications Material:SS304/316
Bottle material	Shape	Filling volume	Filling level(mm)	Neck type
Pet/Glass Bottle	Square/Round /Falt Bottle	100-2000ml	According request ±1mm	As request
Adjustable specifications of the bottle type	Bottle Size:Bottle diameter ≤120mm Bottle Height≤350mm
	If using square bottles, then bottle separating system will be added.
Filling temperature (drinks)	2℃–4℃. Level control:Float ball and pneumatic butterfly valve.
Bottle labeling type		Packing system Min, Spec.		Palletizing system
Manual / Automatic Hot Melt Roll-Fed PVC Shrink Label Full Label/ Half Lable		Film shrinker Robert Packing Carton packing	23 24 34 35 44 45 4*6 6–30Bag/Min	Low position gantry palletizer Robot Palletizer High position
User Ambient Conditions		Temperature:2~40℃;Humidity:No dew
bottle feed-in	conveyor with screw for glass bottles		adopt air-conveyor for PET bottle.

Water Treatment/CIP Cleaning and Material Preparation Systems:				SS304/316
Source of Water	Capacity	water pump	Filter media	RO Membrane
river,/well/spring/lake/ sea/tap water	2-50 T/H	Nanfang, Grundfos	Quartz sand/Active carbon/Sodium ion /Hollow fiber filter	Filmtec Dow/USA Hydranautics/USA
CIP Washing/temperature	Cleaning liquid	Cleaning mode	Over size	Cleaning method
80℃ clean pipeline and Hydraulic cylinder	Acid/Alkali/ pure water	Circulation cleaning	Following capacity	Manual/Automatic
Automatic control system	PLC automatic control:Float ball/solenoid valve/pneumatic butterfly valve.SIEMENS
Filling liquid mixture (Except soda water)	Water, syrup, granulated sugar, food additives (carbon dioxide, caramel color, caffeine) Mix well and match the ratio/automatic. Contains gas and high efficiency
Barrel cleaning	Stainless steel 304/316 double-sided welding,polishing, sanitary, cleaning ball automatic cleaning, 360 ° rotating cleaning,no dead Angle.

Blow molding system :

Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

Drink mixer machine :

This machine is applied for carbonation and proportion mixing of various gas beverages (water, syrup, and CO2), such as lemon and Cola. It is the main equipment among the complete equipment of beverage production line .

Spray Cooler Bottle Warmer:

<1> Its working process can be divided into 3 stages,circulating hot water spraying,warm water pre-cooling.
<2> Temperature and time of cooling can be regulated according to the requirements of user.
<3> It’s widely used in the area of bottled,canned hot drinks cooling,and carbonated drinks warming.

Automatic labeling machine:
<1> Heat shrink sleeve labeling machine
<2> OPP Hot melt labeling machine
<3> PVC label stick labeling machine
It adopts double driving structure ,that is four-wheel driving, self-centering and balanced pressure of four wheels. It can achieve the good effect of transmission of labels smoothly, stably and rapidly.

Bottle packaging machine:
<1> PE film/Half-tray shrink wrapping machine
<2> Carton box packaging machine
It adopts the photoelectric sensor to detect online, gather signals which are controlled by PLC, and adopts piston as executable element, to realize product conveying, combination, film wrapping, cutting, heat& shrink, cool and finally get the finished product.

Carton palletizer :

The high level palletizer is suitable for cartons, plastic crates, shrink wrapped packs and five gallon bottles etc palletizing.With inspection device to check the storage of cartons on conveyor and regulate the speed according to inspection data. With safety device to stop machine and alarm in emergency.

Our services

Q1: Proposal design and make budget
We are capable of providing specialized proposal design and make a general budget for you.
Q2: Equipment production&commissioning
We will arrange the production for you as soon as the order confirmed, and make sure the quality of products, We have client cases in different countries , we can provide theirproduction working video for you .
Q3: Factory layout design
Machines and factory layout design is also available after the proposal confirmed.
Q4: Bottle shape design
We can also help to do the bottle shape design for you according to your needs.
Q5: Label Design
We can also help to design the label for you, and you can share with us your idea too.
Q6: Raw Material supply

We are capable of provide one-stop service, so the raw material supply is also available.

After-service
1, the guarantee of our machines is two years, life-long services, also we will supply spare parts along with the machines free of charge, the parts will be enough for at least 3 years for the normal operation of machines.
2, we can train your engineers in our factory free of charge. IMeans you can send your engineers to our factory to study and training, we have rich experiences for the training, it is the good way to make sure that you can operate and maintain our machines successfully and for long time normal use.
3, we will supply you detail user manual for our machines, also we will make one Video CD to show you how to install and maintain the machines, it will help you to maintain the machines for the long time.
4, We will send our engineers to your factory to install the machines and train your staff how to operate the machines., We have been doing the install jobs for our overseas customers for many years.
5.We will help to arrange the shipping of goods for you and keep you posted about the steps.

FAQ

Q1: Are you manufacturer?A1:Yes, welcome to visit us ! We can show you our machine running.
Q2: How long of your warranty?
A2: Regarding warranty, normally we offer 2 years warranty, and we offer lifetime maintenance.
Q3: Can you provide turnkey project service?
A3: Yes, of course, we can provide the full set of turnkey project service to you, from raw material, to equipments, installation nd training etc.
Q4. Do you accept OEM order?
A4: Yes, we have strong design team and technical team. Therefore we can also accept OEM and customized order with special requirements.
Q5: What else need to be paid attention besides price?
A5: except for the price, we also need pay attention to quality, product construction, design principle, configuration of part list, reasonability, convenience of operation, professional, service and etc.